Fiber Microscope(OL series)

Detailed Product Description

Introduction about  OL-Series Fiber Microscope:

  The OL-Series Fiber Microscope utilizes a white LED for oblique illumination.It produces good image of core condition and contaminants. Some customers prefer oblique lighting because it doesnt show too much.  Technicians will see  enough  detail to clean connectors and even polish to low loss level, but not too much detail to waste time over polishing.  For critical examination of polish quality, we strongly recommend the CL-Series microscope. Specifications:Optical Magnification: 200xPower Requirements: 3 AAA alkaline batteriesLED: Rated life: 100,000 hrs.Weight: 0.6kgSize: 225mm/8.76L x 32mm/1.25 DiameterControls:  Momentary on/off switch, Fine-Focus controlSafety Filter: Built-in IR filterAdapter interface: Uses interchangeable, presentered universal or dedicated adapters Operation Step:Step 1.Input the Fiber which will be checked into the Fiber Insert Entrance, insert another fiber connector into the light source entrance.  Step 2.See from the Eyepiece and press on the on/off LED switch (Illumination) Step 3.Adjust the focus control, just to find the clearest viewing; Guarantee Terms:All products from our company are warranted to be free of all defects in material and workmanship for a period of 12 months from the date of delivery. The warranty does not apply to any instrument which has become worn, defective, damaged or broken due to abuse, misuse, tampering, or unauthorized repairs. Under this warranty, we will repair or replace, without charge to the purchaser, any part of which upon our examination, appears to be defective in materials or workmanship.  Laser Safety information:Every our Fiber Scope is equipped with an attenuating, laser safety filter to reduce the risk of accidental viewing of active fiber emissions. Since many of the wavelengths of light used in the fiber optic industry are invisible to the naked eye, the natural aversion reflex to viewing bright light is suppressed resulting in the potential for long periods of accidental exposure which can lead to permanent damager. The filter we install will provide over 35dBm of attenuation at wavelengths from1310nm to 1550nm. In addition, it will provide over 20.5dBm of attenuation at 850nm. However, it should be stressed that in spite of the protection offered, under no circumstances should an actively emitting fiber be viewed with a visual inspection scope such as the OL-200X.  Warning and AttentionDO NOT use ANY our Fiber Inspection Microscopes to VIEW ACTIVE fiber signals under ANY circumstances. Active fiber signals contain high-powered laser light,it can do much harm to the eyes. So we must avoid contracting with the laser light using direct eyes. The failure to avoid direct eyes contact with laser light can result in serious damage to the eye. Especially, our Fiber Inspection Microscopes may magnify the laser light in active fiber signals; direct eye contact with magnified laser light should be avoided. Laser safety filters, as used in our Fiber Inspection Microscopes, are no substitute for practicing good laser safety. If you are unfamiliar with laser safety  practices,please  ask the  information  from  the distributors or seek  out professional training. There are many capable trainers working in the fiber optic field who can help. How to choose between the OL-Series and the CL-Series?Both our fiber microscopes provide excellent views of the ferrule end face. We recommend 200x magnification for multi-mode and 400x magnification for single-mode:
(1)  If you frequently terminate fiber and have received professional training, you are probably best served by our CL Series microscope.
(2)  If you only occasionally terminate fiber, and are unsure, you might consider the OL Series.